Contact us today, get reply tomorrow or even sooner
Please pay attention to the email with the suffix sophia.joinbling@gmail.com
Your information will be kept strictly confidential.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Allow file type: pdf, jpg, png (less than 20M)
Suitable for exterior wall curtains, interior partitions, and ceilings
Laying methods: Rivets, grooved slide rails
The Through-Colored Fiber Cement Board is a thin panel made from Portland cement, plant fibers, quartz, and other natural minerals through high-temperature and high-pressure steaming. It is a panel with uniform color, varied styles, excellent strength, and weather resistance.
Thickness | Width | Length |
6,8,9,12,15mm | 1220mm | 2440,3050mm |
REMARK: We can also supply other specification as the client’s specially requirement | ||
Item | Index | Unit | ||
Density | ≥1.40 | g/cm3 | ||
Thermal Conductivity | ≤0.35 | W/(m·k) | ||
Water Absorption | ≤28 | % | ||
Water Contain | ≤10 | % | ||
Moisture Movement | ≤0.25 | % | ||
Freezing | No cracking or delaminating after 50 times of freeze-thaw cycles | |||
Non-water soaking | No Water Forms after being tested for 24 hours | |||
Non-combustibility | A1 | / | ||
Bending | Oven dry | Cross | ≥20.0 | Mpa |
Parallel | ≥15.0 | Mpa | ||
Saturated | Cross | ≥15.0 | Mpa | |
Parallel | ≥10.0 | Mpa | ||
Screwing withdraw | ≥110 | N/mm | ||
Impact resistance | Oven dry | No Continuous Cracking After An Impact | / | |
Non-combustibility | A | the highest grade | ||
REMARK: Please contact our technical department if you need more technical index. | ||||
Particularly suitable for exterior walls and curtain walls of modern high-end buildings, renovation projects, typhoon-prone and cold regions, as well as interior partitions and ceilings in high-traffic areas such as public venues.
The length and width of a single board reach 2440mm and 1220mm, approximately 3 square meters. During installation, fewer boards can cover a larger area, enabling faster installation and laying.
When selecting building materials of the same thickness, the light weight of the board reduces the load on the building. Additionally, the construction method of fixing with metal hangers prevents cracking and peeling of the exterior wall, ensuring user safety.
Tested in a low-temperature freezer at -20°C to 2°C for 90 minutes, then taken out and melted in clear water at 20°C to 5°C for 30 minutes (one cycle). After 25 freeze-thaw cycles, no cracking or delamination occurs.
Minimum flexural strength (parallel to fiber direction) ≥ 15 MPa; maximum flexural strength (perpendicular to fiber direction) ≥ 20 MPa. Tested in accordance with GB/T 15227-2007 *Testing Methods for Air Tightness, Water Tightness, and Wind Pressure Resistance of Building Curtain Walls*.
With a low thermal conductivity (approximately 0.35 W/m·K), its excellent thermal insulation performance effectively improves the heat preservation effect of walls, reducing heat loss and achieving a “warm in winter and cool in summer” effect.
The board’s own waterproof performance effectively prevents outdoor liquids from penetrating. The unique lotus leaf effect makes raindrops falling on the board quickly condense into water droplets, which carry surface dust away rapidly.
Comparison with Similar Products from Peers
With full certification for export to European markets, JOINBLING fiber cement boards deliver excellent cost-performance compared to similar brands. They meet international safety and durability standards while providing a reliable, affordable solution tailored to modern construction needs.
Many counterfeit boards fail to meet basic flexural strength standards. In contrast, JOINBLING boards pass strict curtain wall performance tests, including air tightness, water resistance, wind pressure, and planar deformation. This ensures consistent strength, high density, and minimal warping or structural instability.
Compared to low-grade products from asbestos-based or unregulated factories, JOINBLING boards offer superior quality—featuring uniform thickness, minimal surface defects, consistent texture, and stable color performance. These qualities ensure aesthetic consistency and long-term reliability in professional applications.
We carefully select and proportion high-quality raw materials such as plant fibers, cement, silica, and additives. This step ensures the strength of the base layer of the fiber cement board, laying a solid foundation for its durability, dimensional stability, and resistance to harsh environmental conditions.
All raw materials are mixed into a uniform slurry using an advanced automated system. The precise mixing process ensures uniform fiber distribution and stable composition, which is essential to ensure the consistent performance of each fiber cement board.
The fully mixed slurry is pressed under high pressure to compact the material into a dense and hard board. The pressing process strengthens the structure of the fiber cement board and improves its ability to resist cracking, warping, and long-term wear and tear due to moisture or wind and sun.
After pressing, the raw board is moved into a controlled curing environment with strict temperature and humidity settings. This board curing process promotes cement hydration so that each board achieves the best mechanical properties and surface hardness.
Partially cured boards enter the drying room to remove excess moisture. Once dry, it is carefully unloaded and prepared for subsequent processing. This critical step prevents the finished fiber cement board from deforming, mold or internal stress.
The dried boards are cut using automated precision cutting machines to form standard or custom sizes. Precise dimensions and smooth edges ensure installation efficiency and meet architectural design standards for fiber cement board applications.
Each fiber cement board undergoes a strict quality control process, including size, thickness, strength, and appearance inspections. Only boards that meet international standards such as CE or AS/NZS are approved for distribution.
Finished boards are stacked and stored in moisture-proof, organized storage areas. Proper labeling, protective packaging, and inventory control ensure that fiber cement boards maintain quality during transportation and can be delivered quickly around the world.
JOINBLING produces fiber cement boards using raw materials such as cement and plant fibers, which offer longer service life and better quality assurance than traditional wooden boards. They have strong waterproof, fireproof, and insect-proof functions, ensuring safety and greatly reducing maintenance needs. JOINBLING’s technology helps maintain color and prevent fading. The high quality and diverse functions of fiber cement boards make them a cost-effective and stylish choice for any home.
JOINBLING adheres to environmentally sustainable manufacturing practices, producing products with longer lifespans, better quality, and contributions to green environmental protection. The Through-Colored Board is made from raw materials such as Portland cement, plant fibers, and quartz—100% asbestos-free and formaldehyde-free.
JOINBLING finishes offer a curated selection of colors covering the most popular exterior shades. Most people should be able to find the perfect tone for their home in our range.
Budget is a factor, but more considerations include the total cost over the lifecycle and product durability. Therefore, choosing a product that resists rain, sun, fire, and pests and continues to protect your home for decades will greatly reduce repair and maintenance costs. The Through-Colored Board, made of fiber cement, is designed to withstand daily damage from nature and will not burn or fuel fires when directly exposed to fire. Of course, JOINBLING offers unique wall panel styles and colors to help enhance your home’s appearance, allowing you to find the perfect choice.
Cement boards (such as JOINBLING Through-Colored Boards) are waterproof panels that provide a durable base for tile installation. When completing water-related projects, cement boards are essential for protecting interior gypsum boards from moisture. Place them between your tiles and the subfloor for excellent tile adhesion and waterproofing. Cement boards offer higher compressive strength compared to competitors’ panels.
The cost of board projects is influenced by many factors, such as the size of your home, the application scenario, the selected product materials, and supporting facilities. This will help you best estimate the cost. You can also call us for consultation.
Contact us today, Get reply tomorrow or even sooner
Please pay attention to the email with the sophia.joinbling@gmail.com
Your information will be kept strictly confidential.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Allow file type: pdf, jpg, png (less than 20M)
